Gl
bal Leader in
Door Solutions
Robust Dutch Technology
Over 1 Million Installations Globally
Worldwide Presence
OTHER SPECIAL PRODUCTS |
|||||||||||||||||||||||
|
|||||||||||||||||||||||
|
STERRTIL DOCK SHELTER 1000 SERIES
1000 Series Cushion Seals
At loading docks where most vehicles are of approximately the same height and width, the Stertil 1000 series offers the best available option.  Model TP1000 The Stertil cushion seal provides a virtually airtight seal between the vehicle and building. Even the gaps between the trailer doors and bodies are sealed. The TP 1000 has a galvanized steel back plate and therefore suitable for use in the meat processing and food industries where strict veterinary rules apply. Model TI 1000 For docks where vehicle heights differ greatly, the TI 1000 cushion shelter with inflatable header is recommended. Not only does the inflatable header provide an optimum seal, it also stays completely out of the opening of the truck. In most cases cushion seals are tailor made, since dimensions of trucks and sectional doors differ per customer. The most commonly used dimensions are shown below:  Dimensions
Specifications TP 1000 Material: • Back plate: galvanized steel • Covers: black vinyl 950 gr./m2 • Wearplates: black vinyl 950 gr./m2 Finishing: Stertil cushion seals standard have yellow markers on the bottom 600 mm of the side cushions to guide the truck driver. TI 1000 Materials: • back plate: galvanized steel • covers: black vinyl 950 gr./m2 • wearplates: black vinyl 950 gr./m2 • inflatable airbag: high-grade Cordura Technical specifications: • 0,27 kW 400 volt, 3 phase motor • capacity blower 1.300 m3 per hour • time to inflate and deflate ± 15 seconds • standard supplied with control box for switching on/off the blower Finishing: Stertil cushion seals standard have yellow markers on the bottom 600 mm of the side cushions to guide the truck driver. |
|||||||||||||||||||||||
